General Duty Belt

M24 – Our range of M24 (24MPa) Conveyor Belts are abrasion resistant and highly resistant to cuts and gouges. These are mainly used in all mining industries and process industries such as cement (limestone), steel (crushed metallic ores), stone crushing industries (granite & blue metal).

N17 – Our range of N17 (17Mpa) Conveyor Belts are abrasion resistant, however applications not requiring the same cut and gouge resistance as that of the M24 Grade. These conveyors belts are mainly used for conveying bauxite, asbestos, ash, chalk, cement, lime, Surface coal etc.

Typical Applications :

  • Slag conveyors
  • Coking conveyors
  • Broken glass / cullet
  • Coal handling plants
  • Cement, concrete plants
  • Sand, gravel, stone industry
  • Road construction machinery
  • Timber industry and sawmills
  • Power plants , garbage incineration plants
  • Silica sand or materials containing silica sand
  • Recycling, compost industry, mineral processing plants
COVER GRADE CHARACTERISTICS AND APPLICATION
PHYSICAL PROPERTIES
General Purpose Belting
Standard
Before Ageing
After Ageing

Tensile Strength MPa

Elongation %
Tempe-
rature of Ageing ºC
Duration of Ageing hours
Change in Tensile Strength %
Change in Elongation
%
Maximum Abrasion Loss
Mm3
GRADE M-24
This Grade is recommended for conveying heavy, sharp, highly abrasive materials like metallic ores, granite, lime stone, coal, Blast furnace slag & clinker etc.
IS 1891 PART-I BS 490 PART-I ISO 4195/1 DIN 22102
24
450
70
72
+10-20
+10-25
150
GRADE N-17
Recommended for conveying less severe and moderately abrasive material like sized coal, ash, chalk, bauxite etc.
IS 1891 PART-I BS 490 PART-I ISO 4195/1 DIN 22102
17
400
70
72
+10-20
+10-25
150
GRADE N-17 SYNTHETIC
Composed of Synthetic Rubber mainly, this grade is suitable for arduous application as M-24 and has similar wear resistance properties.
IS 1891 PART-I
17
400
70
72
+10-20
+10-25
150
HEAT RESISTANT BELTING
INTERNATIONAL GRADES & STANDARDS :
Standard & Grade Minimum Tensile Strength (Mpa) Minimum Elongation at
Break (%)
Maximum Abrasion Loss (mm³)
DIN-X 25 450 120
AS-M 24 450 125
IS -M24 24 450 150
BS -M24 24 450 150
SANS – M 24 450 120
SANS – N 20 400 150
DIN – Y 20 400 150
AS – N 17 400 200
1S -N17 17 400 200
BS – N17 17 400 150
RMA 1 17 450 150
JIS -S 18 450 200

Quarry King Conveyor Belts

Features :

  • Anti-tear and rip resistant qualities without any equivalent in conventional fabric conveyor belts
  • Special Steel wefts with high elongation and tensile strength properties arranged at a nominal pitch: –

To break the ripping momentum; limiting any longitudinal cutting and tearing

  • Superior carcass protection through greater impact energy distribution across the belt width
  • Exceptional fastener-holding ability if required
  • Pulley system modifications not required; transversal steel/fabric weft has no influence
  • Longer service life under heavy duty applications
    Manufactured to DIN standards